2019 Land Pride RGR1258

Call for Price


Stock Image

Stock Image

New/Used
New
Availability
In Stock
Location
Kubota Tractor of the TriState LLC
Title
Clean
Condition
Excellent
Year
2019
Manufacturer
Land Pride
Model
RGR1258

Overview

Description

Land Pride is expanding our popular line of 3-point Rotary Tillers with the addition of two gear drive models -- the RGA12 forward rotation and RGR12 reverse rotation. These American-made tillers feature Cat. 1 hitch, plate steel A-frame and 540 RPM gearbox. Both models include a 17" diameter rotor, 6 "C" shaped tines per flange, and a 7" tilling depth. The rotor is powered by a spur-gear drive in an oil bath with a heavy stamped drive cover. The RGA12 and RGR12 Models are designed for compact tractors up to 60 HP.

Features
  • American made: American made means better quality & parts availability. Most tillers are imported.
  • Tractor hp range: 23-60 hp
  • Reverse tilling action: Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can.
  • 3 Year limited gearbox warranty: 3 Years on housings, seals, bearings. Shows our confidence in the product.
  • 42", 50", 58", 66", 74", & 82" Working widths: A wide range of widths are available to meet specific customer needs.
  • 7" Tilling depth: For deep soil penetration.
  • Formed plate steel upper hitch: Plate steel is stronger than flat bar type hitch.
  • Fits Land Pride Quick Hitch: Allows for quick and easy one person hook-up.
  • Park stand: Allows for easy hook-up and storage.
  • Adjustable skid shoes: Control depth with seven adjustments.
  • Formed and reinforced rear deflector: Keeps dirt in and leaves a level finish. Forming gives deflector additional strength. Adjustable deflector allows for various finish results.
  • Front deflector: Front deflector is flexible to take the beating from rocks or debris.
  • Bolt in rotor: Rotor removes and replaces easier for servicing.
  • 17" Rotor swing diameter: For deep tilling and turns the soil over faster.
  • Six "C" shaped, heat-treated tines per flange: "C" Shaped tines require less hp to move through the ground. Six tines per flange make for a better seedbed in less time than four tines.
  • Double lip seal on rotor bearing: Double lip seal helps keep the dirt out and the grease in.
  • Fully shielded slip-clutch driveline: Protects gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins.
  • Gear drive enclosed in oil bath: Gear drive requires less maintenance than roller chain drive. Oil bath keeps wear to a minimum.
  • Stamped gear case cover: Stamped forming gives the chain cover strength.
  • Optional BX driveline: This driveline will fit B and BX Kubota tractors without cutting it to fit. Not quick hitch adaptable for B & BX Kubota tractors.
Specifications
  • Recommended tractor Power Take-Off hp: 23 to 60 HP
  • Weight: 530 lb.
  • Working depth: 7 in.
  • Working width: 58 in.
  • Overall width: 63 1/2 in.
  • 3-Point hitch type: Category I, 3-point plate steel A-frame, Fits Land Pride Quick Hitch
  • Driveline: Category 4 with Slip Clutch
  • Optional BX driveline: Category 4 with Slip Clutch, Not recommended with Quick Hitch
  • Number of flanges on rotor: 7
  • Number of tines per flange: 6
  • Tine construction: Alloy steel heat-treated in.C in. shaped blades
  • Rotor rotation: Reverse rotation
  • Rotor swing diameter: 17 in.
  • Rotor shaft speed: 211 RPM at 540 RPM power take-off
  • Rotor bearing mount: Machined cast iron with ball bearings
  • Skid shoes: Adjustable
  • Park st0and: Adjustable
  • Rear deflector: Adjustable
  • Front deflector: Rubber
  • Gearbox construction: 60 HP in.put at 540 RPM 1.92:1 ratio, Cast iron housing with ASAE 1 3/8 in. - 6 spline shaft, tapered roller bearings, bevel gears, drain plug, level plug & fill plug
  • Gearbox lubrication: 2 Pints of SAE 80-90W EP oil
  • Drive end construction: Spur gears enclosed in. an oil bath with oil level plug or sight glass and oil fill/breather plug
  • Gear case lubrication: 6 Pints of SAE 80-90W EP oil
  • Spur gears: Case hardened teeth

Specs

Dimensions

Working Width
58 in. (147 cm)
Width
63 1/2 in.
Length
27 1/4 in.

General

Recommended HP
23 - 60 hp
Weight
530 lb. (240 kg)

Related Products